FME Micro Labeling System
The new Micro Labeling System offers unmatched flexibility and performance than any other competing system. It is modular in design and each component can operate separately as stand alone systems or rolled together to form the Micro Labeling System. Set–up takes less than 30 minutes with less than 10 forms wasted. The quick set–up and low waste make the Micro Labeling System ideal for short run jobs of any size. The new system can produce specialty die-cuts, form/label combinations, integrated products and process piggy back labels on the fly from 3 ply pressure sensitive material. All these features and performance are available at a very economical price, costing much less than competing systems. It can be equipped to run from pack-to-pack or roll-to-fold and is completely expandable for any production requirement.
Micro Labeling System, Pack-To-Pack
Micro Forms Labeler 18S
• Label roll unwind
• Waste rewind
• Integrated score cutter for processing pressure sensitive stock
• Integrated paper pack input table
• Two (2) side adjustable paper heavy duty pin tractors
• Computer and keyboard
• End of paper sensor
• Loop control
• Gravity delivery
Specifications:
|
Labeling accuracy: |
+/– .0098" depending on label and paper quality |
|
Score cutter cutoff tolerance: |
+/- .03" depending on label and paper quality |
|
Labeling speed: |
up to 270 feet per minute depending on label and paper quality |
|
Score Cutter speed: |
up to 150 feet per minute depending on label and paper quality |
|
Max. label size: |
height 24" x width 18" in steps 1/6", 1/8" & 1/10" |
|
Min. label size: |
height 1/3" x width 1/10" in steps 1/6", 1/8" & 1/10" |
|
Max. paper size: |
height 24" x width 18" |
|
Min. paper size: |
height 1/2" x width 2 3/4" |
|
Max. label waste diameter: |
8" |
|
Max. height paper pack: |
17" |
|
Max. height label pack: |
9 1/2" |
|
Folding depth: |
gravity folder |
|
Label materials: |
self adhesive, piggybacks, flexible plastic cards, holograms, etc... |
|
Label shapes: |
angular, circular, stars, any shape, etc.... |
|
Registration control: |
in increments of .004" |
|
Floating label program: |
3 labels of identical size and vertically inline, can be applied at three equal or non equal distances within one form. |
|
Weight & dimensions: |
660 LB; L=42" x W=42" x H=63" |
|
Electrical requirements: |
220V, single phase, 50/60 Hz, 10 amps |
Motorized 90˚ Turn Bay Station
• loop control
Micro Forms Die Cutter
• Magnetic rotary cylinder & anvil
• Four (4) side adjustable paper heavy duty pin tractors
• Computer and keyboard with registration control in steps of .004" on the run
• Loop control
• Window cut-out removal unit for large cut-outs (air compressor & vacuum not included)
Specifications:
|
Max. web width: |
18" |
|
Min. web width: |
3" |
|
Max. paper draw: |
24" |
|
Min. paper draw: |
1/8" |
|
Max. die-cut height: |
16" |
|
Min. die-cut height: |
1/3" |
|
Intermediate die-cuts: |
in increments of 1/6", 1/8" & 1/10" |
|
Material weight: |
13# up to 125# depending on material |
|
Magnetic cylinder circ.: |
17" |
|
Max. speed: |
up to 15,000 rev. per hour depending on material & matrix |
|
Die-cutting tolerance: |
+/- .004" |
|
Die-cut running adjustment: |
in increments of .004" |
|
Magnetic cylinder undercut: |
.019" or .023" (customer specified) |
|
Air requirements: |
6 to 8 bar |
|
Weight & dimensions: |
1870 LB; L=35" x W=44" x H=57" |
|
Electrical requirements: |
220V, single phase, 50/60 Hz, 16 amps |
Micro Labeling System, Roll-To-Fold
Includes everything above plus:
Micro Forms Unwind
• Roll 27" unwind unit, stand alone
• Mobile unit
• Loop control
• Friction break
• Roll shaft
• Pull roll
• Manual speed adjustment
Specifications:
|
Cones: |
2 3/4" & 3" |
|
Max. roll diameter: |
27" |
|
Max. web width: |
18" |
|
Min. web width: |
2" |
|
Max. speed: |
up to 300 fpm |
|
Weight & dimensions: |
110 LB; L=34" x W=37" x H=40" |
|
Electrical requirements: |
220V, single phase, 50/60 Hz, 4 amps |
Micro Forms Folder
• Spiral Folder unit, stand alone
• Mobile unit
• Loop control
• Two (2) side adjustable paper heavy duty pin tractors
• Belt delivery table
• Standard fold gears in 7 1/3", 8", 11" & 12"
Specifications:
|
Max. web width: |
18" |
|
Min. web width: |
8" |
|
Max. folding depth: |
16" |
|
Min. folding depth: |
6" |
|
Max. speed: |
up to 300 fpm |
|
Weight & dimensions: |
550 LB; L=42" x W=42" x H=63" |
|
Electrical requirements: |
220V, single phase, 50/60 Hz, 6 amps |
[New Equipment] [Products] [Feedback] [Search]
Send mail to sales@fme.com with questions or comments about this web site.
International
Customers having trouble sending FME e-mail
Copyright © 1996 Forms Manufacturers Equipment
3640 Princeton Oaks Street, Orlando, Fl 32808
Phone: (407) 296-5880, U.S. Toll Free: (800) 327-5676 Fax:(407)
296-5886
Last modified: June 03, 2002
